SPECIFICATION OF JET FUEL    TS-1

Parameters

maximum (supreme)

The first

1

Density at 20, not less

780

775

2

Fractional structure: the temperature started distillations, not above

150

150

10% it is driven away at temperature, not above

165

165

50% it is driven away at temperature, not above

195

195

90% it is driven away at temperature, not above

230

230

98% it is driven away at temperature, not above

250

250

3

Kinematic viscosity mm2/c (cCT) in +20C, not less

1.30(1.30)

1.25(1.25)

In -40 c, no more

8(8)

8(8)

4

The lowest heat of combustion

42120

42900

5

Height of not smoking flame

25

25

6

Acidity of fuel, no more

0,7

0,7

7

Iodic number – grams of iodine on 100 grams of fuel, no more

2,5

3.5

8

The temperature of the flash determined in closed area not below

28

28

9

The temperature began crystallization, not above

-50

-50

10

Dependent of temperature on oxidation stability in static conditions at 150 degrees, no mote: concentration of a deposit on 100 see fuel

18

18

11

Mass fraction of aromatic hydrocarbons, no more

22

22

12

Concentration of actual pitches, no more

3

5

13

Mass fraction of the general (common) sulfur

0,2

0,25

14

Mass fraction mercaptane sulfur

0,003

0,005

15

Mass fraction of hydrogen sulphide

Absence

Absence

16

Test for a copper plate at 100 degrees within 3 hours

Maintains

Maintains

17

The maintenance of ashes

0,003

0,003

18

The maintenance (contents) of water-soluble acids and alkalis

Absence

Absence

19

The maintenance (contents) washed naften acids

Absence

Absence

20

The maintenance (contents) of mechanical impurity and waters

Absence

Absence

21

Interaction with water, a point, no more: a condition of an interface

1

1

Condition of the divided (shared) phases

1

1